Peltoc

Notes: This used screw compressor is in excellent condition and has been well maintained. The oil, oil filter and air filter have been replaced during servicing. Producer: Atlas Copco Model: G2 Year: 2022 Capacity: 281L/min, Max 10 Bar Motor: 2,2 Kw Working hours: 4198 h Power: 400V / 50HZ / 3 Phase Noise level: 61 dB Weight: 110 Kg Sizes: 630x620x950 mm (LxWxH) - Condition: Like new! - Very low noise level. - Operating hours: Only 4,198 hours, of which just 694 hours under load. - Regularly serviced and maintained. - A large intake pre-filter at the rear prevents excessive dust from entering the screw compressor's motor compartment. - Equipped with an Atlas Copco Elektronikon BASIC controller, which allows you to adjust the compressor's operating pressure, control it remotely, and view various warnings, error messages, upcoming maintenance schedules and much more important information. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: The compressor is in good condition and previously regularly maintained. It was in operation until the moment it was removed and replaced with a more productive compressor. Producer: Kaeser Model: N 351-G Year: 2018 Capacity: 2530L/min. Max pressure 25 Bar (Inlet pressure 7,5 Bar) Motor: 11 kW Working hours: 5537 h Power: 400V / 50HZ / 3 Faze Noise level: 77 dB Weight: 415 Kg Sizes: 1550 x 880 x 1020 mm (LxWxH) - The cables between the compressor and the electrical panel are included and marked. - Version with an air aftercooler. - Previously regularly maintained. - Only 5,537 operating hours. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: Screw compressor is in good condition and well maintained! During maintenance, the oil, oil filter, pre-filter, and V-belts were replaced. Producer: Kaeser Model: SX 6 Year: 2001 Capacity: 600L/min, Max 10 Bar Motor: 4 kW Working hours: 26200 h Power: 400V / 50HZ / 3 Phase Noise level: 64 dB Weight: 150 kg Sizes: 600 x 600 x 800 mm (LxWxH) - In very good condition! - With a large pre-filter. - Simple design and reliable. - Low noise level. - An ideal compressor for a workshop. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: This used screw compressor is in good condition and has been regularly serviced in the past. We have serviced the compressor, replacing the oil, oil filter, air filter, pre-filter and V-belts. Producer: Kaeser Model: SX 6 Year: 2000 Capacity: 600L/min, Max 10 Bar Motor: 4 kW Working hours: 22170 h Power: 400V / 50HZ / 3 Phase Noise level: 64 dB Weight: 150 kg Sizes: 600 x 600 x 800 mm (LxWxH) - In very good condition! - Equipped with a large pre-filter. - Simple design and reliable operation. - Low noise level. - An ideal compressor for a workshop. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: We offer a large choice of new pressure air receivers/ compressed air receivers, high-pressure air receivers at the best prices. We offer vertical and horizontal, painted and galvanized air receivers. 50 - 900L vertical air receivers (11 Bar) are immediately available from stock. 1000 - 40 000L (11- 40 Bar) are available on order. All air receivers are manufactured in the European Union, CE marked and come with the pressure vessel certificates. To get exact pricing and more information about air receivers, please visit our website WWW.PELTOC.COM or feel free to contact us. We also offer a wide variety of other compressed air equipment, such as screw compressors, line filters, pneumatic components, air cylinders, solenoid valves, and more.

Notes: We offer a wide selection of new and used screw compressors, air dryers, pipeline filters, air receivers, pneumatic components, air cylinders, as well as various compressor maintenance accessories and spare parts. Compressors are available in a power range from 2.2 kW to 500 kW. We only sell high-quality and reliable brands, such as Alup, Kaeser, Atlas Copco, Compair, Ceccato, Almig, and others. In addition, we offer a wide range of compressor maintenance accessories and professional servicing. Our stock changes regularly, so If you cannot find what you’re looking for we may still have it available and just not listed yet. Get in touch with us if you can’t find what you’re looking for. All used compressors are in good condition, full serviced, tested in maximum load, and with a guarantee in Estonia. WWW.PELTOC.COM

Notes: Used high-pressure booster compressor Alup BSTAIR in good condition. Producer: Alup Model: BSTAIR 20-40 FF Year: 2024 Capacity: With inlet pressure10 Bar: 3830L/min, Max 40 Bar Motor: 15 kW Working hours: 760 h Power: 400V / 50HZ / 3 Phase Weight: 430 Kg Sizes: 1535x750x1050 mm (LxWxH) - Low operating hours - With compressed air aftercooler - Touchscreen control panel Airlogic2T Later, you only need to connect the power supply and the input and output to the compressed air line. The compressor has all the necessary sensors and other things in one and is connected to the touch-sensitive control panel. The Alup BSTAIR FF version includes a compressed air aftercooler, necessary pressure sensors, and an Airlogic2T touchscreen, additionally equipped with ICONs. The Alup Airlogic 2 T touchscreen control panel allows you to adjust various compressor operating parameters, working pressure, remote control functions, etc. It also displays upcoming maintenance, possible faults, error history, energy consumption, load level, and more. - The control panel supports 10 different languages, including Estonian - The control panel includes an integrated ICONs smart connectivity system, which displays the compressor’s current operating status, error messages, operating hours, upcoming maintenance time, and much more important information for service personnel via the internet. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: Boost your production efficiency and reduce downtime with the PELTOC WIND 2400 — the fast, safe, and reliable solution for winding pipes and cables. Developed from over 10 years of hands-on experience, the WIND 2400 combines proven mechanical design with modern automation, helping manufacturers across Europe simplify setup, reduce interruptions, and maintain consistent product quality. Proven in production: More than 20 Peltoc winding machines are already in operation across Europe — running thousands of hours with minimal maintenance and excellent reliability. Why choose PELTOC WIND 2400? Plug & play setup — ready to use with a standard 16A connection Independent torque & speed control for perfect winding of any material Corrosion-resistant stainless-steel traversing system Intuitive 7″ industrial touchscreen with movable operator panel Automatic drum release for safe and effortless drum handling Transport beams for quick relocation between production lines The result? A winding process that runs smoother, faster, and with fewer interruptions, saving time, labor, and maintenance costs — giving your production line a real competitive edge. See more information, videos, and technical details https://www.peltoc.com/en/tooted/cable-rope-pipe-winder WWW.PELTOC.COM

Notes: Used screw compressor is in technically good condition and has been previously regularly maintained. Maintenance performed by us included oil, oil filter, and air filter replacement. Producer: Almig Model: Belt 18-10 Year: 2013 Capacity: 2620L/min, Max 10 Bar Motor: 18,5 Kw Working hours: 19468 h Power: 400V / 50HZ / 3 Phase Noise level: 68 dB Weight: 260 Kg Sizes: 800 x 1200 x 1000 mm (LxWxH) - The screw compressor is compact - Simple construction and reliable - Only 19468 h operating hours - Equipped with Air Control BASE controller, which allows quick adjustment of working pressure and other important parameters, displays various error messages, upcoming maintenance, etc. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: Used screw compressor is in good condition and well maintained! During maintenance, oil, oil filter, air filter, and pre-filter were replaced. Producer: Almig Model: Flex 18 Year: 2018 Capacity: 970 - 3540L/min, Max 10 Bar Motor: 18,5 Kw Working hours: 17625 h Power: 400V / 50HZ / 3 Phase Noise level: 66 dB Weight: 295 Kg Sizes: 1140 x 890 x 1315 mm (LxWxH) The compressor is equipped with a frequency inverter and direct drive, making it up to 35% more energy efficient than standard screw compressors. Thanks to the frequency inverter, the compressor produces exactly as much air as is consumed, has smooth start-up, no “PEAK” current surges in the power network, maintains constant working pressure, and does not require as large a tank as regular screw compressors. - In excellent condition with low operating hours. - Low noise level. - With a pre-filter to prevent excess dust from entering the motor compartment and keeps the cooling radiator cleaner. - Regularly maintained in the past. - Equipped with Almig Air Control P (Premium) touchscreen controller. The Almig Air Control P (Premium) touchscreen allows you to: - Connect and control up to seven compressors from the same interface. - Program a weekly schedule, set automatic on/off times, define pressure thresholds for starting/stopping (each day of the week can be individually programmed). - Precisely configure the compressor to meet customer needs, ensuring maximum energy savings. Settings include display info, brightness, languages, max output, pressure settings, motor ramp-up time, and more. - Provides service reminders. - Displays detailed error messages and a support contact number. - Many more advanced features included. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: Used screw compressor is in very good condition and well maintained! During maintenance, oil, oil filter, air filter, and pre-filter were replaced. Producer: Almig Model: Variable 65 Year: 2015 Capacity: 2110 - 11010L/min, Max 5 - 13 Bar Motor: 80 Kw Working hours: 19600 h Power: 400V / 50HZ / 3 Phase Noise level: 70 dB Weight: 1000 Kg Sizes: 2100 x 1100 x 1600 mm (LxWxH) The compressor is equipped with a frequency inverter and direct drive, making it up to 45% more energy efficient than standard screw compressors. Thanks to the frequency inverter, the compressor produces exactly as much air as is consumed, has smooth start-up, no “PEAK” current surges in the power network, maintains constant working pressure, and does not require as large a tank as regular screw compressors. - In excellent condition with low operating hours. - Direct drive from the motor to the screw element. - Low noise level. - Simple design and reliable! - Regularly maintained in the past. - Equipped with Almig Air Control P (Premium) touchscreen controller. The Almig Air Control P (Premium) touchscreen allows you to: - Connect and control up to seven compressors from the same interface. - Program a weekly schedule, set automatic on/off times, define pressure thresholds for starting/stopping (each day of the week can be individually programmed). - Precisely configure the compressor to meet customer needs, ensuring maximum energy savings. Settings include display info, brightness, languages, max output, pressure settings, motor ramp-up time, and more. - Provides service reminders. - Displays detailed error messages and a support contact number. - Many more advanced features included. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: Used screw compressor in good condition and well maintained! During maintenance, the oil, oil filter, pre-filters, and air filter have been replaced. Producer: Alup Model: Largo 30-8 Year: 2013 Capacity: 5100L/min, Max 8 Bar Motor: 30 kw Working hours: 18511 h Power: 400V / 50HZ / 3 Phase Noise level: 68 db Weight: 542 kg Sizes: 1155 x 830 x 1555 mm (LxWxH) Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: The compressor is in good condition and has been properly maintained! It has been regularly serviced. During the service, the oil, oil filter and air filter were replaced. Producer: Alup Model: SCK 10-10 Year: 2012 Capacity: 1000L/min, Max 10 Bar Motor: 7,5 Kw Power: 400V / 50HZ / 3 Phase Noise level: 61 dB Weight: 215 Kg Sizes: 965 x 665 x 1045 mm (LxWxH) - The compressor is compact, simple in design and reliable. - The compressor has a low noise level. - Equipped with an Alup Aircontrol 5.0 control panel, which allows you to adjust the compressor's operating pressure, control the compressor remotely, and view various warnings, fault messages and upcoming maintenance requirements. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: The used screw compressor is in good condition and has been regularly serviced. The maintenance performed by us included changing the oil, oil filter, air filter, and V-belts. Producer: Alup Model: SCK 52-10 Year: 2005 Capacity: 5150L/min, Max 10 Bar Motor: 37 Kw Working hours: 17304 h Power: 400V / 50HZ / 3 Phase Noise level: Ca. 68 dB Weight: Ca. 450 Kg Sizes: 800 x 1200 x 1200 mm - The compressor is compact - Has a simple design and is reliable - Equipped with an Air Control 1 controller, allowing for quick adjustment of the compressor's working pressure and other key parameters, displays various error messages, upcoming maintenance, etc. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM

Notes: Used screw compressor in good condition and well maintained! During maintenance, the oil, oil filter, air filter, and pre-filter have been replaced. Producer: Boge Model: C 25 D Year: 2017 Capacity: 3100L/min, Max 8 Bar Motor: 18,5 kw Working hours: 25542 h Power: 400V / 50HZ / 3 Phase Noise level: 70 dB Weight: 300 Kg Sizes: 1000 x 1070 x 1730 mm (LxWxH) - The compressor has a built-in compressed air dryer! - The compressor is compact - Simple design and reliable - Equipped with a large pre-filter - Control panel BASE Control allows adjustment of operating pressure and other important parameters, displays various error messages, upcoming maintenance, etc. Shipping cost is not included in the price! We deliver across all of Finland. Delivery time: 3–4 working days. For an exact shipping cost, please feel free to contact us! Please visit our website to see our selection of used screw compressors! https://www.peltoc.com/en/muuk/compressors WWW.PELTOC.COM